www.thechoice1productsreviews.com/greenpowereasy/

One of these alternative energy resources is wind power. Wind turbines continue to be developed that are progressively more energy efficient and less costly. “Wind farms” have been springing up in many nations, and they have even become more strategically placed over time so that they are not jeopardizing birds as former wind turbines did.

Another alternative energy resource is the one that is most well known: solar energy. This involves the manufacturing of solar cells which gather and focus the energy given off directly by the sun, and translate it into electricity or, in some cases, hot water. As with wind energy, solar energy creates absolutely zero pollution.

Ocean wave energy is seen by governments and investors as having enormous energy generating potential. A generator in France has been in operation for many years now and is considered to be a great success, and the Irish and Scots are running experimental facilities.

Hydroelectric power has been with us for a while and where it is set up, it is a powerful generator of electricity and cleaner than a grid. However, there are certain limitations to the availability of the right places to set up a large dam. Many run-of-the-river, or small and localized, hydroelectric generators have been set up in recent times due to this limitation.

Geothermal energy is extremely abundant, since it lies directly beneath our feet, just a few miles below the earth’s surface. This energy is produced by the heating of water through the actions of earth’s fantastically hot molten core. The water turns to steam, which can be harnessed and used to drive turbine engines which in turn generate electricity. Great amounts of research and development should be put into geothermal energy tapping.

Waste gas energies, which are essentially methane, reverse the usual energy-pollution relationship by creating energy from waste that lies in the dumps and from some air pollutants. This gas is used in fuel cells and can be used in standard gasoline generators.

Ethanol is a gasoline substitute and is created from such things as wheat, sugarcane, grapes, strawberries, corn, and even wood chips and wood cellulose. There is controversy over this fuel with regards to its ever becoming truly economical or practical except in very localized areas, but technologies for its extraction and admixturing are continuously being refined.

Biodiesel energy is created out of the oils contained in plants. So far, the commercial stores of biodiesel have been created using soybean, rapeseed, and sunflower oils. At the time of this writing, biodiesel is typically produced by entrepreneurial minded individuals or those who want to experiment with alternative energy, but commercial interest from companies is on the rise. It burns much cleaner than oil-based diesel.

Atomic energy is created in atomic energy plants using the process of nuclear fission. This energy is extremely efficient and can generate huge amounts of power. There is concern from some people about what to do with the relatively small amount of waste product atomic energy gives off, since it is radioactive and takes hundreds of years to decay into harmlessness.

There are things we can do around the house, we can go green.  Get your FREE alternative energy report here!

The sun always shines, and even when there is cloud cover, solar energy can be collected and stored as electricity.  So do not think because where you live is cloudy that solar energy is not possible for you.

In some areas of the US and Canada large windmill farms have been created by the power companies.  Wind turbines need the wind to blow at only 11 mph to create electricity.

For less than $200.00  you can build a solar or a power wind turbine for your home.

Check out these top guides here

There are too many factors involved here to answer that question for you. But one way to start is to ensure your home is efficient in the first place. In this article we will walk you through some steps that will help you reduce your energy consumption before you start converting your home.

Reducing Your Energy Needs

One often overlooked step in converting a home to green power is reducing your energy needs in the first place. The average home uses inefficient lighting, power hungry appliances, and poor heating/cooling solutions.  An important step to reducing your energy needs is to look at the inefficiencies in your current system.

Consider:

1. Replacing old incandescent bulbs with fluorescents or led bulbs will cut your power consumption from light in half.
2. Replacing old, inefficient, appliances may reduce your energy bills by as much as 30% by itself.

You should also look at your current heating/cooling solutions. For example an electric hot water heater could potentially be replaced by a solar water heater. Maybe that inefficient air conditioner can be replaced with a more efficient heat exchanger.

If you need help choosing more efficient appliances, an excellent resource for this is put out by the Canadian government: http://oee.nrcan.gc.ca/EnerGuide/home.cfm.  It’s called Energuide, and it covers everything power consumption of home appliance to energy requirements of large commercial air conditioners.

Spend some time looking through that guide and calculating how much you can reduce your power consumption in different areas of your home.  By simply taking a look at everything in your home that consumes energy, you will find ways to reduce your energy needs before you start.

You don’t necessarily have to go all out and spend $10,000 replacing everything – but things as simple as changing your lighting will reduce your energy needs before you start your conversion project.

FREE DIY alternate energy report available here!

Really when you get to this step you have two separate options:

1. Build them yourself – Obviously this is the least expensive route
2. Buy Pre-made Windmill Blades – Costs more but is a lot less work

From that I wanted to take some time to talk about the advantages/disadvantages of going either way. In reality if you put a value to your time, by the time you finish building the wind turbine blades yourself, the cost is close to equal. On the other hand, if you’re cheap like me, it might be that you’d rather do it yourself and save the money. In either case there are advantages to going either way.

Buying Your Windmill Blades

First let’s cover the advantages of buying your blades. In this case they are really quite obvious.

1. The blades are professionally made
2. More varieties of materials you can buy your blades in
3. Less concern about getting the correct shape to catch the wind.

Of course there are also disadvantages to buying windmill blades instead of making them yourself. First, it becomes more difficult to tailor your blades to the generator you selected/created for your DIY windmill. And then, of course, there is the cost involved.
Machined blades can run you as much as $1,000 or more. To offset that cost, you may want to check eBay. Often you can find premade blades there, in diameters of 4’ to 6’, for around $100.

Making Your Own Windmill Blades

While there are advantages to buying your windmill blades, there are also some big advantages to building them yourself.

1. The blades are created with your actual windmill design in mind.
2. You save your money, and your home power system will cost less.
3. You get to choose the style of turbine blade to fit your area. Especially in low wind speed areas, this is important.
4. You get the satisfaction of telling everyone – you did it!

If you do choose to build your own windmill blades, I suggest you take the time to learn about the top three wind power conversion guides. With our top pick specifically, they recently added a video that teaches that exact topic.
In any case, be sure to take the time to design your blades to fit your application. Taking the time to do so will ensure your wind mill operates trouble-free for years to come!

Free DIY alternate energy report still available HERE!

To start, take the time to look at the wind speed charts that fit your area:

If You Live in the USA:  http://www.ncdc.noaa.gov/oa/climate/online/ccd/wndspd.txt

If You Live in Canada: http://www.wunderground.com/global/Region/CN/WindSpeed.html

If You Live in the UK or Europe: http://www.xcweather.co.uk

If you live in Australia: http://www.wunderground.com/global/Region/AU/WindSpeed.html

Assuming that the average wind speed in your area is above 8MPH, then continue on to the other considerations listed below. If you don’t live in a suitable area, then you should consider a solar power conversion instead.
Convert Your Home Today:
Wind Turbine Considerations

Once you’ve determined that wind power is suitable for your area there are a few other things you need to consider.  Really this is just about asking some questions and then answering them. Taking the time to do so will ensure you choose a wind power system that fits. Especially if you are planning to live off the grid, you should take the time to answer these questions before you start.

Your Power Needs

The first thing that needs to be considered is your power needs. Are you simply looking to reduce your power bill with a single small windmill? Or, will you want to power your entire home?
If you’re looking to power your whole home, you should take the time to calculate your actual power requirements. If you take the time to download Earth 4 Energy, their guide comes with a calculator and instructions on how to do this (you’ll need this guide anyway).

Storing Power from Wind Turbines

From the answer to your first question you then need to consider building a storage system for your wind turbine. A simple array of batteries can be designed to store as little or as much power as needed.
If you’re only building a small wind power solution to reduce your power bills then this is likely less of a concern.
On the other hand if you’re looking to live off the grid, you will need to consider energy storage. You should use your calculation for your power needs to design this part of your system. Take into consideration how much power you will need to store and for how long.
If you have weeks where there is less wind than usual, ensure that you have a large enough battery array to compensate (or better yet work to reduce you energy needs by using high efficiency bulbs and appliances).

Having a Backup Plan

Finally, for those who plan to live entirely off the grid, you should consider your backup plan. For most of us consistent power is a requirement. Ensure that you design your wind turbine solution with a backup plan. Generally a small gas generator is enough to ensure you have power if something goes wrong.

Get your  FREE DIY alternate energy report HERE!

Of course before you start with anything, you should get a good DIY solar guide, and you’ll be walked step by step through the process of setting up your solar energy solution. Aside from that though, let’s cover the basics of what you’ll need to go solar!

There are 7 main components you’ll need when wiring up a solar energy solution for your home. It should be noted here that we’re talking about converting a home, and not just creating portable solar energy solution (in which case you’ll only need 4 components).
Convert Your Home Today:

Before you install your home energy solution, you’ll need the following components. These are listed in the order they will be wired into your solar energy system.

1. Solar Panels – In most DIY applications these will be built by you. You order discount photovoltaic cells, and assemble those into 50W, 75W, or 100W Panels.
2. Array DC Disconnect – This simple device is basically just a switch. It allows you to cut the DC power from your solar panels should system maintenance be required. If you shop around you’ll likely pay less than $25 for this component.
3. Charge Controller – Most home systems will be built with a battery backup. The charge controller ensures that a consistent amount of power is sent to the batteries, and that the batteries don’t discharge at night. Again, if you shop around for this component, it won’t be a large expense.
4. Deep Cycle Batteries – To store the power from your solar panels, you will need deep cycle batteries. If you find reconditioned batteries, these can be obtained for fairly cheap. Better yet, you can get old batteries for free and recondition them yourself.
5. System Meter – This component is actually optional, but it is suggested so that you have a clear way to see how much power is being fed into your home from the solar panels.
6. Converter – Since your solar panels produce DC power, and your home runs on AC power, the converter makes the solar energy usable by your home. A 1500W converter likely won’t cost you more than $50.
7. Backup Power – Most systems will also include some sort of backup power. In an off grid application this would generally be a generator. In a city or town, the power grid itself provides the backup.

From there the system gets wired into your home breaker box. At this stage, unless you are qualified, you might consider getting a qualified electrician to install the system. At any rate, you now have an idea of what will be needed to get your home running on solar energy.

If you haven’t done so yet, you should also consider downloading a copy of one of the top guides to teach solar panel DIY. Doing so will ensure you have all of the information you need to get the conversion finished right – the first time!

Get a FREE report HERE!!